Contact Kindyscape and arrange a site meeting. Where we discuss the area as well as product needed for the job.
Written up. Agreed on by both parties. Contract signed dated and emailed. Deposit taken.
We inform the director and or owner of the childcare centre, when we will start. Keeping them up to date with job progress and completion. We will safety barricade ourselves into the job, on large areas such as multiple play grounds. We start and finish one area at a time, as to minimise the disruption to the children and carers.
Depending on the size, position and type of machinery used on the construction we will either use hard pool fencing system or soft roll form barricade. Safety is paramount.
The removal of decomposable materials is a must. They include bark, natural grass, tree stumps etc. If this is not done properly the surface will subside making it a trip over hazard and will damage the surface whether it be synthetic grass or rubber.
This is installed for a nice clean and secure hold for the synthetic grass and is not needed for wet pour rubber. Done with 40mm x 40mm ACQ treated timber or concrete edge beam. Depending on how tight the curves are and circumstance. This is then pegged to the sub base. Levelled out to the surrounding areas patios, verandas and foot paths. Fixed with screws as to not make a trip over edge.
The void is filled with road base and compacted with a rammer. This can be over .5m deep in some bark, soft fall areas. This has to be done with a loader. Then we use a manufactured to Kindyscape requirements crusher dust. Shaping the base using a laser. Level and screed to meet requirements such as fall heights, drainage and to meet flush with existing areas.
Rubber is installed to the required thickness and distance as to comply with Australian Standards. This is installed around forts, swings or can be used in a free space for mobile apparatus or games area.
This is rolled out and cut to the required length. Laid down over manufactured crusher dust or rubber sheeted soft fall. The joins are then glued together using the supplied layered fibred backing tape. With a spirit bases adhesive. A small amount of washed kiln dried river sand is machined into the synthetic grass for ballast.
This is produced in a multitude of colours and combinations. For best results this has to be installed first with the correct mixal machine using the summer or winter binder. As well as being installed through the correct heat periods of the day. Levelled out to correct thickness and troweled smooth. All too Australian Standards.